Altair Announces 2019 Winners of its Enlighten Award

Ferrari, FCA, Material Science Corporation, ZF, Alba Tooling & Engineering Automotive Management Consulting GmbH, csi entwicklungstechnik GmbH take top honors.

Ferrari, FCA, Material Science Corporation, ZF, Alba Tooling & Engineering Automotive Management Consulting GmbH, csi entwicklungstechnik GmbH take top honors.

Ferrari’s Portofino was a 2019 Altair Enlighten Awards winner in the Full Vehicle, low-volume production category. Image courtesy of Altair.

Altair announces the winners of the 7th annual Altair Enlighten Award. The awards were presented at the 2019 CAR Management Briefing Seminars Seminars (MBS) in Traverse City, MI.

“The winning products demonstrate the power of innovation and engineering disciplines to reduce vehicle weight and emissions,” says Richard Yen, senior vice-president, strategic solutions team and global automotive business of Altair. 

Full Vehicle, Low-volume Production Category Winner: 

Ferrari’s Portofino, weighing 80 kg lighter, while being 35% stiffer than the outgoing California T that it replaces, was the winner in the Full Vehicle, low-volume production category. The Portofino is designed to be driven daily, and converts in just 14 seconds from a “berlinetta” coupé to a drop-top, thanks to the retractable hard top system. It is much lighter than the outgoing model, thanks to the adoption of new components featuring design developed by use of structural optimization, innovative aluminum technologies and the use of production techniques. 

“Taking the Altair Enlighten Award in the full vehicle category for the Portofino BIW is a fantastic result for Ferrari. We have a dedicated group of engineers who constantly strive to achieve the most ambitious technical objectives the company sets, so this award honors their achievements,” sys Michael Leiters, CTO, Ferrari.

Full Vehicle, High-Production Category Winner:

FCA’s 4th generation Jeep Wrangler, eliminated 92 kg from the previous generation vehicle. It employs an advanced strategy of lightweight aluminum, sheet molding compound (SMC) and high-strength steel. Technology highlights of its new design include a lightweight body system that shed 51 kg (>12%), by strategically applied advanced lightweight materials to maximize customer value, comfort, safety, and convenience, as well as minimize manufacturing impact to bolster the benefit of lightweight material applications.

“We are immensely proud of the work we did on the one-of-a-kind Jeep Wrangler,” says Rob Wichman, interim head of product development, FCA North America. “We are also grateful to Altair for recognizing engineering achievement, in general.”

Module Category Winner:

ZF with its latest knee airbag (KnAB) design replaces the typical metal housing found in existing low mounted knee airbags by a fabric housing. This lightweight “Global Baseline Module” technology is based on a fabric housing and provides high restraint performance capability while allowing weight reduction. With a weight reduction of 30%, it is 20% more compact, and a design that can be tailored for all specific customer needs and markets to help meet global safety test requirements and standards.

General Motors & Continental Structural Plastics for the CarbonPro pickup box were the runners up in this category. CarbonPro is a carbon fiber reinforced thermoplastic pickup box. It saves 62 lbs. of mass and offers an impact-resistant bed that adds strength and durability to the truck.

Enabling Category Winner:

Material Sciences won top honors in the Enabling category for MSC Smart Steel, a spot weldable low-density composite laminate that is used in a body application. MSC Smart Steel is a new multilayer steel laminate engineered as a direct substitute for vehicle body parts stamped from low carbon steel. The concept involves creating a three-layer laminate whereby the outer skins are steel, and the middle layer consists of a low-density conductive polymer core, which allows MSC Smart Steel to be stamped and spot welded.  

DSM Engineering Plastics, Inc., Cikautxo Group, General Motors, Henn GmbH & Co KG–2019 Cadillac XT4 Arnitel Thermoplastic Co for the polyester hot charge air duct, were the runners up for the Enabling Technology category. The new Arnitel thermoplastic copolyester (TPC) hot charge air duct for the 2019 Cadillac XT4 engine replaced a thermoset rubber solution, significantly reducing the weight, cost and design complexity of the turbocharging system for the GM CSS 2.0L turbo engine.

The Future of Lightweighting Winner:

The award for the Future of Lightweighting went to a feasibility study for #ULTRALEICHTBAUSITZ, a collaborative effort by Alba tooling & engineering, Automotive Management Consulting GmbH, and csi entwicklungstechnik GmbH. #ULTRALEICHTBAUSITZ aims to rethink car seat design from scratch through use ofgenerative technologies with the philosophy of “form follows force.” Their goal is to manufacture a comfortable and highly adaptable, yet ultra-lightweight vehicle seat prototype with a mass of about 10 kg.

“We were pleased to once again receive so many outstanding entries this year,” says Carla Bailo, president and CEO at the Centre for Automotive Research. “The entries demonstrate excellence in their unique approaches to meet the challenges for weight reduction through innovative materials and joining technology combined with design simulation.  This is critical to the success of lightweighting initiatives as the future of mobility including electric and autonomous vehicles continues to develop at a rapid pace.”

Read more.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

More Altair Coverage

Sponsored Content
Re-evaluating Computer-aided Optimization
Traditionally design engineers take the lead in defining the shape of a product, but emerging generative design tools give software unprecedented autonomy.
Editor’s Picks: Oct. 10-16, 2019
One of the picks will be chosen as DE’s Editor’s Pick of the Week.
Altair Launches 3D Design and Rendering Solution
Inspire Studio is a new solution for designers, architects and digital artists to create, evaluate and visualize designs faster.
Altair Acquires Polliwog Co.
Polliwog, a high-tech software company near Seoul, South Korea, provides electronic design automation software to the electronics industry.
Real-Time Simulation Software for Mechanical Equipment Added to Altair Partner Alliance
Vortex Studio—a simulation and visualization software for worksite system-level, in-the-loop modeling of mechatronics and mechanical equipment —features high-fidelity, real-time simulation, the company says.
Solving for Trust: Restraints of AM Materials Simulation
Limited test data on materials performance for metals AM printers is slowing confidence in still-fledgling technology.
Altair Company Profile

Share This Article




About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering. Press releases can be sent to them via DE-Editors@digitaleng.news.

Follow DE
#22996