Hexagon Releases New Machine Simulation Software

Virtual manufacturing software avoids quality issues machining complex parts, reduces time to simulate toolpath adjustments.

Virtual manufacturing software avoids quality issues machining complex parts, reduces time to simulate toolpath adjustments.

Enhancements to the NCSIMUL software, that serves as a digital twin of a specific machine to plan and optimize its numerical control (NC) programming, enable machinists to determine the location of the 5-axis singularity point and avoid it for the first time. Image courtesy of Hexagon.


New machine simulation software, released today by Hexagon’s Manufacturing Intelligence division, addresses 5-axis machine instability.

Enhancements to the NCSIMUL software, that serves as a digital twin of a specific machine to plan and optimize its numerical control (NC) programming, enable machinists to determine the location of the 5-axis singularity point and avoid it for the first time. 

When the toolpath generated by computer-aided manufacturing (CAM) software passes through, or near to, the singularity point, the machine tool behaves erratically. The machine tool can vibrate, causing “chatter marks” on the component being machined, which affects the quality of the surface finish. 

The new release helps predict the singularity point. By predicting the lines of code where there may be problems with vibrations and surface quality, programs can be improved by modifying cutting strategy parameters or changing strategies altogether. It also helps manufacturers optimize the stock position and orientation.

“Singularity point analysis makes it possible to achieve the required surface quality for complex parts virtually, before going to the shop floor to cut the first part,” says Philippe Legoupi, product owner, Hexagon’s Manufacturing Intelligence division. “NCSIMUL also now simulates the performance of the target machine to evaluate when the 5-axis cutting factor is close to 100 percent, so that users can modify the stock orientation and position to achieve the desired feed rate. Armed with these two capabilities, manufacturers can now decrease 5-axis cycle times and achieve consistent quality for any part.”

A new material-specific optimization tool, Optipower, was introduced last November that optimizes the program and limits the power necessary to remove material. In NCSIMUL 2021.1, Optipower now calculates the cutting force applied to the tool’s external contact point, ensuring the maximum force of the tool is not exceeded, specifically for the tangential cutting force. It also extends tool life, reducing tooling costs.

This data is fully utilized, explains Legoupi, “We’re working to make manufacturing smarter through better use of simulation data. The maximum torque and cutting force for each machining sequence are integrated into the analysis report, and progress can be monitored with a force-time graph visualisation. This data is also used to define a minimum ‘feed by tooth’ to avoid being below the minimum chip.”

Additional enhancements to the latest software release improve productivity even more, through faster simulation after making changes, along with greater automation and scripting flexibility. Data can now be sent from the user’s CAM system to NCSIMUL 2021.1 without any adjustment before launching verification, meaning NC programmers can start debugging the G-code file during programming, and go back and forth between CAM and simulation.

New intermediate stock management functionality ensures the simulation will always start from the last updated intermediate. When loading a new version of the G-code file, NCSIMUL automatically stores the previous file, and compares both records at the end of decoding. 

Learn more here.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

More Hexagon Manufacturing Intelligence Coverage

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.




About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via DE-Editors@digitaleng.news.

Follow DE
#24603