nano3Dprint Reveals Dual-Dispensing 3D Printer

nano3Dprint debuts the B3300 Dual-Dispensing 3D Printer, which can produce medical devices, wearables, batteries, solar and other electronics with embedded circuitry.

nano3Dprint debuts the B3300 Dual-Dispensing 3D Printer, which can produce medical devices, wearables, batteries, solar and other electronics with embedded circuitry.

nano3Dprint unveils its B3300 Dual-Dispensing 3D Printer. The B3300 produces objects like medical devices, wearables, batteries, solar and other functional electronics with embedded circuitry. 

nano3Dprint’s B3300 3D electronics printer.

The printer’s dual-material dispensing system can print two materials together to build combined material prints. The B3300 expands users’ range of printing materials—from gold and silver to UV curable polymers and silicone. Full 3D patterns may be printed onto any substrate and combine materials. 

A wide viscosity range (1mPa·s to 54000 mPa·s) enables use of highly conductive inks in the B3300. Functional inks and pastes may be printed down to 8 mils (0.20 mm) trace width. The printer is also able to quickly print thick layers (500 microns) with high viscosity multi-materials in a single pass, resulting in turnkey electronic items ready for use. 

“The B3300 3D printer ... can print wearables with embedded conductors, cell phone parts with internal antennas and electronic devices with internal sensors,” says Gretta Perlmutter, Product Success Manager, nano3Dprint. “It allows for incorporating sensors, strain gauges, heaters, complex antenna geometries and optical components in a 3D print and provides manufacturing solutions for the medical, agriculture and solar industries, and general consumer electronics.” 

“This is a revolutionary development within the electronics 3D printing industry; new combinations of materials difficult to print together, like silicone and gold or dielectrics with semiconductors, can now easily be printed in combination with the B3300,” added Perlmutter. 

The printer’s video inspection system allows users to monitor their progress in real time via computer to ensure an error-free high-resolution design print with accurate layer height, surface finishing, tolerance and roundness. The B3300 3D electronics printer is compatible with SD cards and flash drives for direct printing and is small enough to fit on a desktop. ​It is compatible with most CAD or Slicer software and retails for $6,000.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.




About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via DE-Editors@digitaleng.news.

Follow DE
#26928