Simcenter Testlab Empowers Digital Twin

Upgrade enables better use of test-based data from design and simulation to validation and certification.

Upgrade enables better use of test-based data from design and simulation to validation and certification.

Simcenter Testlab NVH synthesis component-based TPA predicts full-system NVH performance earlier in the development cycle by combining component models and measurements. Image Courtesy of Siemens Digital Industries Software

Siemens Digital Industries Software’s latest version of the Simcenter Testlab software suite draws tighter synergies between the physical and virtual worlds, making test-based data accessible far earlier in the design cycle while maximizing the utility of the digital twin.

Simcenter Testlab, part of the Simcenter simulation portfolio, combines high-speed multi-physics data acquisition capabilities with a full suite of integrated testing, analytics, and modeling tools. The software covers acoustic testing, durability testing, dynamic environment testing, and structural dynamics testing, among other areas.

Simcenter Testlab is increasingly used not just at the later stages of development for testing and validation purposes, but far earlier in the cycle as a way to inject more realism into simulation models and the digital twin. “By capturing and analyzing data, engineers can investigate how the vehicle is performing compared to multiple targets and objectives along with the root cause of problems,” explains Bruno Massa, vice president of Simcenter testing solutions for Siemens Digital Industries Software. “The combination of hardware and software brings the verification done with simulation and virtual models closer to real life.”

The Simcenter Testlab upgrade delivers a variety of functional enhancements while advancing model-based development with the introduction of model-based system testing. The latter helps to close the loop and enable system validation based on combined physical and virtual test models. In addition, component-based transfer path analysis (TPA) predicts full-system noise, vibration and harshness (NVH) performance earlier in the development cycle via the combination of component models and measurements, Siemens officials said.

Simcenter Testlab model-based system testing closes the loop with simulation, enabling system validation based on a combined physical and virtual test. Image Courtesy of Siemens Digital Industries Software

Simcenter Testlab model-based system testing closes the loop with simulation, enabling system validation based on a combined physical and virtual test. Image courtesy of Siemens Digital Industries Software.

“The breakthrough value is that engineers can combine any subsystem or components on a physical test bench with the full system around it represented [in simulation],” explains Massa. “Engineers can physically test a gear box on a test bed while driving a specific vehicle on a specific road represented by a system simulation model. The simulation combines the two data streams—one from the virtual model and one from the physical test bed—creating one set of data that is really the digital twin in practice as deep as you can imagine.”

Other highlights of the release include:

  • Features for addressing the challenges in vehicle electrification, including support for new minimum noise standards for Acoustic Vehicle Alerting Systems (AVAS) as well as active sound design to create brand-specific sounds;
  • Extensions to the Neo software platform for test-based engineering that focus on boosting productivity, collaboration, and analytical insights.

To learn more about the latest Simcenter Testlab release, check out this video.

More Siemens Digital Industries Software Coverage

Sponsored Content
Digital Twin Continues to Proliferate Software and Digital Industries
From the ancient Pythagorean Cup to the ultra-modern rocket launchers, all with Simcenter and all in this issue of Engineering Innovation.
SoftInWay Partners with Siemens
The new partnership with Siemens Digital Industries Software means an expansion of the software portfolio for SoftInWay’s clients.
Autodesk Fusion adds ECAD tools, Siemens develops CAD for VR, JPR publishes CAD report, more
Autodesk Fusion adds ECAD tools, Siemens develops CAD for VR, JPR publishes CAD report, more
Virtually Trained
Still using textbooks and whiteboards? AR/VR-assisted learning is faster, more effective and less expensive.
AI Rewrites the Possibilities of Digital Twin
Developers of the virtual design tool see AI as providing the catalyst for a major shift in product development.
Siemens NX CAM Unveils Updated Capabilities in New Release
The software can accelerate machining, program multiple robots, print color parts and generate production-ready CNC programs using a cloud-based technology.
Siemens Digital Industries Software Company Profile

Share This Article




About the Author

Beth Stackpole's avatar
Beth Stackpole

Beth Stackpole is a contributing editor to Digital Engineering. Send e-mail about this article to DE-Editors@digitaleng.news.

Follow DE
#23142