DE · Topics · Resources · Downloads · Sponsored Content

Improve Powder Utilization by Investigating the Property Effects of Reusing AM Powders

Reduced powder costs up to 80% by reusing powder in the SLS process.

PROBLEM

High material costs are a major economic reason for continued limited application of additive manufacturing (AM) for batch production. Powders are expensive; nylon 12 powders, for example, cost between $75 and $100 per kilogram, while titanium is roughly twice that amount.

In a typical build, only 5-20% of the powder volume is fused into useful parts. The economic models must take into account the powder that is discarded, making the material in AM parts up to five times more expensive than the raw powder.

OBJECTIVE

The objective of this program was to provide a substantial reduction in material costs for orthopedic applications involved in AM part production by decreasing the amount of discarded powder.

The materials considered were titanium (Ti-6Al-4V), two types of stainless steel (316L and 17-4 PH), and nylon 12. To quantify the changes resulting from the number of reuses in selective laser sintering (SLS), a powder bed fusion process, a total of eight reuse cycles was completed for each powder. Tensile testing, printed part densities, chemical analysis, and powder characterization were performed and analyzed.

Fill out the information below to download the resource.

For which of the industries do you perform design engineering or related functions? Select all that apply.
By downloading this content, I agree to receive the DE 24/7 Newswire, a twice weekly free email newsletter (you may choose to opt-out in the newsletter).

Latest News

Sponsored Content
Data Science Finds New Role in the Fight Against COVID-19
GPU-accelerated data visualization and analysis could lead to a better understanding of the virus.

GA-ASI Completes Its First Test Flight With Metal 3D-printed Part
General Atomics Aeronautical Systems marks a technology milestone as its first metal additively manufactured part takes to the skies on...

Element Signs Contract With Morf3D
The work for Morf3D will include a full range of materials testing: powder characterization, chemistry, metallurgical, mechanical and fatigue...

Sponsored Content
Configure the Right Workstation for SOLIDWORKS 2020
Experts weigh in on the best hardware and SOLIDWORKS settings.

All posts