Perfecting Productivity With Proper Workstation Peripherals

Engineering power isn’t just in the workstation; the right monitor and mouse also make the difference.

Engineering power isn’t just in the workstation; the right monitor and mouse also make the difference.

Using SolidWorks with a Dell Canvas. Image courtesy of Dassault Systemes and Dell.


Engineers use workstation-class computers because they are more reliable, more durable and more suitable than enterprise or consumer systems. After spending time to find the right specs for the workstation internals (RAM, CPU, graphics processing units and storage, many times the externals are an afterthought. 

Productivity improvements are not limited to computational factors. In conversations with engineers, workstation vendors and peripheral manufacturers, Digital Engineering learned what input and output devices (peripherals) provide the most benefits to engineering and design workflows. 

See More, Do More 

“Our studies have found that in some cases productivity can be increased by 50% or more with multiple monitors,” says Jon Peddie, president of Jon Peddie Research (JPR) and an expert on the use of graphic technologies for productivity. “Realism and the details revealed with more display area not only improve understanding in a visualization, but increase enjoyment. It’s tiresome to have a constrained view of the world; it’s like looking at the world through a tube or a pair of binoculars.” 

“Monitors really improve workflow,” says Danny Payne, CEO of Orbital Computers. He says the best news in recent years for engineers is software support for 4K resolution (4096x2160 pixels). When Windows 10 and monitors with 4K resolution became mainstream, they were used primarily for gaming and video production. 

“Engineers would buy a 4K monitor but their CAD program would not scale elements properly to support the monitor,” adds Payne. Because 4K monitors offered quadruple the resolution of the previous generation, but the software wasn’t supporting the increase, drawings and models would appear one-fourth the size the user expected. But now, all CAD vendors are directly supporting 4K and the results are spectacular. 

“Once you use 4K for CAD, it is impossible to go back to [high definition],” says Payne. “Everything looks so much sharper, diagonal lines in particular. 

There are two major monitor panel technologies, in-plane switching (IPS) and twisted nematic (TN). Payne says TN offers faster response times, which makes it good for gaming. IPS offers better color accuracy, better color contrast and better viewing from a wider field. Generally speaking, the response rate is 5 to 6 ms slower on IPS, compared with TN. 

“Six milliseconds is nothing in CAD use,” notes Payne. 

Orbital Computers stocks several monitors for its customers. Payne says his favorite at the moment is the BenQ PD3200U. It offers factory-calibrated color accuracy with a custom report included with each monitor shipped. A built-in CAD/CAM mode boosts contrast for wireframe and solid modeling work. “It is a real top-of-the-line monitor,” he says.

The BenQ PD3200U is specifically calibrated to support CAD/CAM applications. Image courtesy of BenQ.

Payne says he is often asked by customers if a 55-in. 4K television would be a good monitor for engineering. 

“TVs have input lag,” Payne says. “They are not built for interaction but for streaming signals. Plus, the larger size causes eye fatigue.” For daily work, Payne says a 24-in. HD monitor is better than a 55-in. 4K television. “The 4K TVs would be OK in a conference room, but not for dedicated one-person use.” 

Mice in Space 

Everyone we talked to about a mouse said the same thing: the SpaceMouse line of 3D mice from 3Dconnexion are the industry standard. 3Dconnexion started as a division of Logitech and eventually then spun out as a separate company, and now offers a line of input devices designed specifically for creators of 3D content, primarily CAD but also media and entertainment. 

The 3DConnexion SpaceMouse Professional can be customized in software to support various CAD programs. Image courtesy of 3Dconnexion.

The latest addition to the SpaceMouse line is the CAD Mouse Pro Wireless. 

“It took a while to get the word out about it,” says Ken Denton, senior sales manager at 3Dconnexion. “But now they are selling like crazy.” 

The entire line includes models that are stationary with a variety of programmable function buttons, as well as the more traditional moving mouse, designed for ease of use with 3D content creation. 

“We think the user experience is intuitive,” says Denton. No tutorials ship with SpaceMouse products, but 3Dconnexion will do free onsite training when a company makes a bulk purchase. When a driver for a specific piece of software (such as SolidWorks) is downloaded, there is a brief tutorial specific to the software. 

The learning curve is “generally a couple of hours to be good and a few days to be great,” Denton says. The software that runs a SpaceMouse knows how to automatically adjust the center point when a model moves. “Zoom a model and then release. The cursor automatically moves to the center of mass,” Denton adds.

Software plug-ins are available to tailor the SpaceMouse function keys to one of several popular mechanical CAD products including PTC Creo, Dassault Systèmes’ SolidWorks and CATIA; and Siemens NX and Solid Edge. The SpaceMouse Enterprise also features function keys designed to map keyboard macros to a button. 

“A SpaceMouse Enterprise with map keys for Creo, for example, transforms the workflow,” says Denton. 

In 2018 3Dconnexion commissioned the renowned Fraunhofer Institute for Industrial Engineering to study the ergonomics of using SpaceMouse products in CAD applications. The Institute found that users made 29% fewer hand movements, allowing for a 28% increase in overall productivity, compared to the use of a traditional mouse. (For DE’s report on the study, click here.

Both Display and Input

One device mentioned often by those we interviewed is a display and an input device. The Dell Canvas was a surprise announcement at CES 2017, and has steadily grown a following that goes beyond the users of Dell workstations. It looks like it could be a tablet computer (think Microsoft Surface Studio) or a designer’s input tablet (think Wacom Cintiq). 

Dell recommends the 27-in. Canvas sit at a 10° angle (a hinged support is built in) and horizontal on the desk in front of a larger monitor. The engineer then uses Canvas for input and as the main display; the large monitor becomes an extension of the visual workspace. 

The Canvas uses two input devices, a sketching pen and a round spinning dial. The dial is placed on the screen; in use it displays various menus (such as a color wheel) when required. The dial is configured in Windows 10 using Wheel Settings; users can also create custom settings. Any application that works with Microsoft Surface Dial also works with the Canvas dial, as both use the same Windows software functions. 

The sketching pen technology is licensed from Wacom. The pen is lightweight and requires no batteries. A side button on the Canvas can be programmed to convert the pen into an eraser. 

The Dell Canvas can be used with any Windows 10 application, even if a special driver is not available. 

Options for AR/VR/MR Display

Augmented reality (AR), virtual reality (VR) and mixed reality (MR) displays are becoming more common in engineering workflows, especially for review and collaboration. 

“Increasingly as VR becomes a regular part of the engineer’s workflow, a VR headset becomes valued for both design and simulation,” notes John Ludwig, the product manager at HP for the HP Reverb. The Reverb is the headset and a unique backpack computer to run it, designed for enterprise applications. The headset offers 2160x2160 resolution in each eye.

Finnish startup Varjo Technologies is making waves with its XR-1, a video pass-through MR headset that delivers photorealistic image quality with integrated eye tracking. Unlike AR, where a camera image is combined with computer graphics overlay, the Varjo XR-1 generates the full field of view to combine reality and graphics. Cameras on the headset digitize the world in real time. The image is then multiplexed inside a GPU and the virtual content is then displayed in the headset. 

A comparison of the field of view on the Varjo XR-1 compared to competitive devices. Image courtesy of Varjo Technologies.

Varjo says latency is <15 ms, which the company says is fast enough to make it a true “reality” device. 

“XR-1 brings all the convenience of seeing your body as well as the real world around you and being able to look at your colleagues while designing a virtual object or environment,” says Urho Konttori, chief product officer and co-founder of Varjo. “The XR-1 can show mixed reality with true-to-life fidelity you can only achieve using video-pass-through. Lifelike mixed reality is quite literally impossible to achieve with optical-see-through systems.” 

Volvo Cars was one of the first manufacturers to use the Varjo XR-1 to test-drive virtual car designs on the road. By adding virtual elements to the interior of the car, Varjo says designers are able to perform design studies before a car is built. Volvo engineers have also used the XR-1 to test drive real cars with the driver wearing the headset. 

“With Varjo XR-1, we can start evaluating designs and technologies while they are literally still on the drawing board,” says Henrik Green, chief technology officer at Volvo Cars. “Instead of the usual static way of evaluating new products and ideas, we can test concepts on the road immediately. This approach offers considerable potential cost savings by clearing bottlenecks much earlier in the design and development process.”

The HTC Vive Pro virtual reality headset seems to be gaining the most traction as an engineering and collaboration tool. Dassault Systèmes is working with HTC to use the headsets as a cost-effective replacement for CAVE room-size viewing rooms. PTC Vuforia software is used for manufacturing floor training. But at the engineer’s desktop, the use of VR is still mostly limited to preparing VR versions of models. 

For more on the use of virtual reality in engineering, click here. 

More 3Dconnexion Coverage

Customer Story: 3Dconnexion x Joe Gibbs Racing:  Passion meets precision
From the Daytona 500 to the Clash at the Coliseum, each race offers a unique and mesmerizing experience for the fans. But behind the scenes it takes ongoing preparation to get a stock car ready for race day. Learn how 3Dconnexion...
Ergonomic Evaluation of 3D Mice
The study was split into a laboratory study and a field study. The goal of the laboratory study was to measure and observe human factors issues, health-related issues as well as productivity.
Editor’s Pick: Improving virtual reality workflows for engineers 
Software extensions for 3Dconnexion devices allow existing 3Dconnexion device users to add Unreal Engine, Unity and iClone support to their devices. 
Editor’s Picks: August 11-17, 2022
One of the picks will be chosen as DE’s Editor’s Pick of the Week.
3Dconnexion Unveils Solution for Digital Content Creators
Unreal Engine, Unity and iClone are the latest applications with new, fully compatible support for 3Dconnexion devices.
IntelliCAD Technology Consortium and 3Dconnexion Form Integration Partnership
The integration between IntelliCAD and 3Dconnexion provides end users with navigation, including QuickZoom functionality, extensive customization options, command access and more.
3Dconnexion Company Profile

More Dell Coverage

Artificial Intelligence for Design and Engineering Workflows
In this white paper, learn how artificial intelligence and machine learning can improve design and simulation.
Rise of the AI Workstation
Given the rapid interest in artificial intelligence, more workstation vendors are rising to meet demand.
Compact Power Without Compromise: Dell Precision 3280 Compact Workstation
Dell’s latest ultra-small form factor workstation makes no compromises.
SIGGRAPH 2024: NVIDIA Releases Microservices to Empower AI Apps and Robot Training
NVIDIA NIMs expected to attract developers to NVIDIA Omniverse™
GPUs Lift Heavy Simulation Load
Using Altair EDEM and NVIDIA RTX™ GPUs, Astec Industries has improved and accelerated its DEM simulations.
Quality and Safety Drive Monitor Innovations
The latest monitors reduce eye strain while increasing visible detail.
Dell Company Profile

More Hewlett Packard Coverage

Hewlett Packard Company Profile

More Jon Peddie Research Coverage

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

Randall  Newton's avatar
Randall Newton

Randall S. Newton is principal analyst at Consilia Vektor, covering engineering technology. He has been part of the computer graphics industry in a variety of roles since 1985.

  Follow DE
#24214